Vamo V2 Variable Wattage & Voltage Mod
Vamo is a variable wattage & voltage device with a 510 connection. This device has a max amp of 5, watts range from 3 to 15, blue LCD
screen with a display showing working resistance. Voltage runs from 3 to 6. The
body can be separated to accommodate 2 – 18350 IMR, 1 – 18650 IMR or 1 – 18350
The Vamo does not include batteries & charger. The retail price is body only.
1: Output Voltage from 3.0V to 6.0V, adjusting the working volt +- 0.1V by pressing + and - buttons.
2: Keep pressing the + button more than 3 sec, LCD screen displays the present working resistance.
3: Keep pressing the - button more than 3 sec, the LCD screen showing the battery volt.
4: 5X click, LCD screen displays " on " or " off ".
5: Output power 3W~15W.
6: Max Armature Current 5A.
7: on/off Mode allows you to shut the unit off completely.
8: Reverse battery protection keeps circuit safe if the battery is installed backward.
9: Battery Monitoring shuts the unit off once battery has reached end of charge.
10: Amperage limiting system protects against over current situations.
11: Thermal Monitoring shuts the device off if it detects a high temperature condition.
12: Fit atomizers with resistance 1.5~5.0ohm.
13: Time limit protection function, it will shut down with more than 10s each puff.
14: LCD displays " LO-Ω" if resistance lower than 1.2ohm, "LO-V" if short circuit. BTW, VAMO support both AVG or RMS,
keep pressing " +" button more than 10sec, if LCD screen displays 001 means AVG, 002 means RMS, loose the "+" button and keep pressing it more 10sec, you may change AVG to RMS or RMS to AVG.
1-Vamo Body Chrome or Black Chrome